m menu image  m home

Pellet Stove NPS45


Details

  • Manufactured by: Napoleon

Description

A renewable energy source, environmentally friendly, economical, convenient… these are just some of the reasons a Napoleon® pellet stove is the perfect solution to heat your home. The freestanding stove provides Zone Heating furnace performance and a reliable heating source. The NPS45  gives you uncompromising pellet performance year after year with the comfort of knowing you have selected a product made with true craftsmanship and advanced technological innovations.

PRODUCT FEATURES

  • EPA exempt
  • Convenient top, loading for easy fueling
  • Automatic ignition
  • Stove hopper pellet capacity is 55 lbs (capable of handling a full bag of pellets eliminating partial bags left open)
  • Variable speed auger and variable speed blower provide maximum comfort and control
  • Heavy-duty, 1/8” thick, seamless heat exchange tubes radiate heat into the room for maximum efficiency even after the stove is shut down
  • Hinged door for convenient access to combustion chamber for routine maintenance…no tools required!
  • Handy cleaning/filling rake
  • Four stage FAILSAFE™ system features:
    1) an automatic blower over-ride switch
    2) a high temperature limit switch
    3) a low air pressure switch
    4) a power failure safety shut down for your peace of mind
  • Thermostatic control capability via wall mount or easily installed thermostatic remote control
  • Digital control provides adjustment to both the fuel feed rate and combustion blower speed. This unique feature maximizes the stove’s performance when using lesser quality fuel. Even low grade fuel (although not recommended) can be burned in the NPS45 due to its ability to fine tune the fuel combustion air ratio
  • Built-in heat exchange cleaner rod maintains cleanliness and efficiency of heat exchange tubes
  • Effective clean glass airwash system
  • Optional hopper extension allows longer burn times without refilling providing a total loading
    capacity of 80 lbs.
  • Optional outside air kit with through the wall vent
  • Optional decorative PHAZER® ceramic log set
  • President’s Limited Lifetime Warranty

OPTIONS & ACCESSORIES

Ash Pan Door and Extra Large Ash Pan
(Standard)
Door Finishes Painted Black, 24 Karat Gold Plated and Satin
Chrome Plated Finishes
Trivets 24 Karat Gold Plated and Satin Chrome Plated Finishes, Painted Black
(standard)
 Cast Iron Burn Pot
(Standard)
Hopper Extension
Increases Pellet Capacity from 55lbs. to 80lbs.
 PHAZER® Decorative Ceramic Log Set
F60 Remote Control Adjusts Heat and On/Off  Heat Exchange Tubes
(Standard)
Firebox Diffuser Fins
(Standard)
    120 CFM Convection Blower standard with unit
Decorative Sandstone Brick Panel MIRRO-FLAME™ Porcelain Reflective Radiant Panels 120 CFM Convection Blower
(standard with unit)

PRODUCT SPECIFICATIONS

Model NPS45 – Pellet Stove
BTU’s (Heat Input) 8,500 – 42,500  
Hopper Capacity 55 lbs.
Area Heated (sq. ft.)** Up to 2,000
Burn Rate (lbs./hr)* 1-5  
Burn Time (Low Burn) Up to 55 hours  
Flue Diameter (F) 3″  
Electrical Rating Volts Amps Hz
115 3.6 60
Heat Circulating 120 CFM Blower Included  
Outside Air Kit Optional  
Mobile Home Certified Yes
Blower Kit Available Corner Rear Sides
2″ 3″ 6″
This appliance has been tested to ASTM E 1509, UL 1482, ULC S627 AND ULC S628.

*Small pellets will increase or decrease the stated burn rates and burn times. Differences of +/- 20% may occur depending on fuel quality.

**Figures may vary with individual conditions such as floor plan layout, insulation value/heat loss of the house and geographical location.





Specials

Regency Fall Savings

Fireplace Installations

Reviews from Google & Yelp

Good people

Good people

Good people.
Read More ->


Excellent work and custumer service

Excellent work and custumer service

Highly recommend this Family owned business that pays attention to detail. Provided repair as well as creative design and remodeling of my old...
Read More ->